Drainboard runnels are common all over Europe, but have only just started becoming fashionable in the US. Here at Omega Diamond, we figure that the delay is because they are so difficult to fabricate - but no longer! Using either a right-angle grinder or the Blue Ripper Jr for more accurate runnels, you can create a full set of runnels in an extremely short period of time and very little effort.
Designed to be used either wet, the diamond is electroplated to the 1/2 inch (12.7mm) wide runnel wheels to create a perfectly shaped groove every time.
Just like most of our products, these wheels can be used for more than just creating runnels: use them to add that extra flair to door and window casings by adding fluting and other shapes that would be impossible with a router.
If you are intending on using this with a Blue Ripper Jr Rail Saw, please insert a reducing 7/8 inch to 5/8 inch brass washer into the arbor. These washers are commonly available in your shop as they are supplied with just about every small-diameter blade you can buy.
WARNING!! This product contains chemicals including nickel, which is known to the state of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
