Blue Ripper Rails

How to order Rails: 

10ft and 12 ft Rails cannot be purchased through this website because they need to be shipped by freight. Please call our office at (530) 889-8977 to arrange the shipment of rails or email sales@omegadiamond.com to request a freight quote.

This is the strongest rail on the market. Single-piece stainless steel design makes for smooth, accurate cuts across the entire length of your stone.

These rails are compatible with all Blue Ripper™ machines from Omega Diamond. You can easily set up the Blue Ripper™ Rail on a slab and use any of our machines:

Blue Ripper™ SR
Blue Ripper™ G2
Blue Ripper™ JR
Blue Ripper™ Miter Master

Allow the rail to overhang approximately 12 in. on each side of the stone you are cutting. The Blue Ripper saws are designed to have a runway on each end of the rail past the stone.

By using the rail system there is no need to use gauges, spacers, or shims. Your rail is your guide. With the rail system, you will have the accuracy and smoothness you couldn't get by hand. Please note each Blue Ripper model has a different cutting distance from the rail.

The Blue Ripper Rail is designed to be clamped to the stone using simple C-clamps or our Lockness™ Vacuum Clamps. Simple and effective, these rails have been in production for over a decade, and many of the original rails are still in use - they are very nearly a lifetime investment!

If you have any questions about how to use the equipment or figure out what would work best for you, please call our tech support team: 

+1 (530) 889-8977