UPS is currently not guaranteeing arrival dates. Any claims for compensation are not being approved.
Because of special circumstances there may be a delay in fulfilling orders. We apologize for any inconvenience.
Videos
The Blue Ripper Miter Master Rail Saw creates a perfectly mitered edge by cutting both 45 degree angles simultaneously.
In this video we used:
- The 5hp Blue Ripper Sr.
- The Archon 14 inch blade.
- and 3cm granite.
In this demonstration, the Eagle Edger Jr bevels, flat grinds, and even routes a perfectly straight deep OG profile. Designed as an attachment for the Blue Ripper Jr Rail Saw.
To demonstrates how easily the Red Ripper Sr™ floats on stone, we raised the spindle and threw it around!
Demonstrates the "hammering" technique of exposing new diamond during a cut when the cut slows down due to dull diamond: Simply pull the saw back and quickly tap it into the stone a couple of times. Sounds rough, but it rapidly exposes new diamond allowing you to get right back up to speed.
How to Upgrade to Taper Lock Flange Blue Ripper Sr.
Here we have a basic run down of how to use the 5hp Blue Ripper Sr along with some advice and tips for how to maintain and care for your saw.
Speed demonstration of our Blue Ripper Sr. This video was originally created for a now-defunct daughter company, Omega Equipment and also has demonstrations of tools that have been either retired or upgraded since this video was made.
The Omega Diamond PitBull "BigDog" Stone Shear chewing through 8, 6, and 4cm laminated Black Galaxy granite.
The PitBull "BigDog"™ Stone Chiseler chewing through 8cm laminated Black Galaxy granite.
The Red Ripper Ultralight is the most amazing stone router we've made yet! At only 11lbs, this is the perfect tool to take on the job or use at the shop for under-mount sink holes. Just watch how easily it grinds and polishes the inside edge!
Designed around our versatile Blue Ripper Jr rail saw, these vacuum-brazed diamond wheels allow you to place half-inch (1cm) wide runnels in stone counter-tops with ease and speed. Here we demonstrated doing a tapered set of runnels by adding 2 layers of template material under one end of the 4-foot rail.
How to dress (sharpen) the blade on the Blue Ripper Jr™ Rail Saw
How to dress (sharpen) the blade on the Blue Ripper Sr™ Rail Saw
This video contains a product which we no longer sell, for an updated video with our Red Ripper Ultralight, please click HERE.
Demonstrates, in abbreviated form, how to cut and polish a sink hole in under 22 minutes using the Red Ripper Jr and the Red Ripper Jr Sink Kit.
Demonstrates, in abbreviated form, how to cut and polish a sink hole in under 22 minutes using the Red Ripper Jr and the Red Ripper Jr Sink Kit. This is just the second half, going through the polishing process.
Demonstrates, in abbreviated form, how to cut and polish a sink hole in under 22 minutes using the Red Ripper Jr and the Red Ripper Jr Sink Kit. This is just the first half, going from the cut-out to the shaping process.
The Blue Ripper Jr.™ Rail Saw delivers speed, accuracy and quality work in the shop or out on the job site. No gauge, shims, or offset measurements needed.
This is the best stone router available in its class. Period.
It comes in three variations for your convenience: 2hp, 3hp, and 3hp variable speed. The router used in this video is the 2hp version.
Using this tutorial you can upgrade your existing Blue Ripper Miter Master™ rail saw to use the same set of long-lasting, powerful grinders used in the 2018 model.
This video demonstrates three ways to sharpen the blade on the Blue Ripper Sr.™ Rail Saw.
This video will show you how to replace the Makita grinder that is attached to the Omega Diamond 2-inch threaded spindle - or vice-versa. After watching this you should be able to change out the grinder or the spindle like a pro.
Caution: Be careful not to get dust, dirt, or any other contaminants inside the spindle - doing so will destroy the internal bearings. Work in a clean environment away from any grinding, machining, polishing, etc...
Using this tutorial you can upgrade your existing Blue Ripper Miter Master™ rail saw to use the same set of long-lasting, powerful grinders used in the 2018 model.
How to make perfect stone seams every time with the Blue Ripper Jr™ Rail Saw
The Blue Ripper™ Miter Master with the Xenon II Miter Blade will cut miters in large format porcelain panel chip free*. This video shows the actual recommended speed for cutting.
For more info on the Blue Ripper™ Miter Master Rail Saw visit here
A video demonstration of how to cut a mitered edge using Omega Diamond's Blue Ripper Miter Master™ rail saw.
The PitBull "BigDog"™ Stone Chiseler chewing through 8cm laminated Black Galaxy granite.