Blue Ripper Sr Rail Saw
Do you want the speed, the accuracy, and the quality of work of multi-thousand dollar bridge saws at a FRACTION of their cost? The Blue Ripper™ Rail Saws deliver that and much more.
These saws can cut through 4cm thick stone. The 3hp can cut 2cm "Absolute Black" granite up to the incredible speed of 10 ft. per MINUTE! Simple and strong, the blade cuts next to rail so setting up is fast and easy. No gauge, shims, or offset measurements are needed. The 5hp saw itself, weights only 68 lbs. which makes it easy for a single person to lift and move. The reduced weight also minimizes risk of cracking narrow or thin pieces of material. This rail saw is truly amazing and is considered by the experts to be far superior than the competition in performance and ease of use.
(Speed may vary from benchmark when cutting other materials, thicknesses, or when using other blades.)
5 Horsepower Water-cooled High-speed
Fastest cutting portable rail saw on the market today! Finding that there were no inexpensive, light-weight 5 horse motors available to us, we decided to build our own: this 5HP water-cooled motor is the core of our new 5hp high-speed (3450 RPM) Blue Ripper rail saw. The water that you are already using to cool your blade is fed through custom end-caps manufactured right here in the USA to cool the motor. We incorporated everything we've ever learned in sealing and protecting the motors from the wet environment of sawing stone into these new motors to make sure they provide both the power and the life we demand from our saws.
3 Horsepower Air-cooled
The 3hp is our work horse. It spins at 1750 RPM allowing for a wide range of blade options. This saw has an amazing cutting speed of up to 10 feet per minute. This saw requires single phase 220volt power, and easy cuts through 3cm thick stone in one pass.
2 Horsepower Air-cooled
If 220 volt power is not available at your location, this is the Blue Ripper Sr rail saw for you. Built to the same specification as our 3hp saw, and spinning at the same speed of 1750 rpm. This saw works best on 2cm thick materials, multiple passes are often required for 3cm and thicker materials, due to the lack of Horse Power.
Product may show minor usage (dust, etc.) due to factory testing before shipping.
Blade shipped with product may not match images. We are constantly testing to find faster blades, and we ship each new machine with the best we have at the time of shipping.
DO NOT GREASE MOVING PARTS. Many of our customers have thought that greasing the saw's threaded vertical adjustment shaft or rear hinge pivot will help with the operation of the saw, and it does - but it also heavily reduces the lifespan of those parts: the granite dust combines with the grease to create a highly aggressive lapping slurry that will wear the parts at a very fast rate. If you must lubricate the machine, use a dry spray-on lubricant such as a Teflon or Graphite spray.
|2HP wired for 110v, No Blue Ripper Rail||701-504||$3483.00|
|2HP wired for 110v, Standard 7 & 13 foot Blue Ripper Rails||676-877||$4400.00|
|3HP wired for 220v, No Blue Ripper Rail||873-744||$3483.00|
|3HP wired for 220v, Standard 7 & 13 foot Blue Ripper Rails||788-010||$4400.00|
|5HP wired for 220v, No Blue Ripper Rail||070-373||$3756.00|
|5HP wired for 220v, Standard 7 & 13 foot Blue Ripper Rails||824-833||$4673.00|
Our apologies, this product cannot be sold via this website. Please contact us directly by phone or our contact page to order.
|Reversing direction of 3HP Baldor Motor||174.62 KB|
|GFCI Wiring Diagram||112.44 KB|
|Blue Ripper Sr Manual||316.98 KB|
|Parts List||396.69 KB|