Mini-125 Stone Router
Born out of the economic recession, the Mini-125 Stone Router is a very inexpensive alternative to the amazing Red Ripper series. Built-in hydro float base with permanently bonded rubber delivers smooth action.
Designed to work with your existing variable-speed Makita 9564CV or 9565CV, the Mini-125 directly drives the spindle, meaning no belts to worry about, and simple assembly.
Whether you are looking to start up a shop, or whether you just want your team to have an in-expensive router that they can keep on-hand at all times or even take to the jobsite, the Mini-125 Stone Router is for you.
Water Feed Option
Keeping bits properly wetted while routing the inside of a sink - or anywhere else you have inside corners - can be a bear: the hose is always running into the stone or missing the grinding or polishing surface. The extra heat causes bits, in particular polishing bits, to heat up and prematurely wear - something no one wants to happen. With the water feed option, the water is directed directly through the center of the spindle and into the center of the bit where coolant-through bits can then sling the water right onto the working surface no matter where that surface is. This keeps the bit and stone fully wet at all times, allowing for maximum bit life and a perfect polish.
|Base Only, Base Only||576-568||$786.00|
|Motor Pre-installed with Water Feed||322-081||$1154.00|